DG Ped is a compact, autonomous, quiet and high performance pumping system
Automatic Water Pressure Pump With High Efficiency And SelfPriming
Maintains the pressure constantly accordance with the water required
Sophisticated electronically controlled inverter
Pedrollo submersible water pumps are renowned for their reliability, robust construction, design and efficiency. Designed and Manufactured in Italy the range is exported worldwide through a network of experienced partners.We Power Gas Mastered As The Highest Suppliers Of Submersible Water Pumps In Dubai,Uae .
Pedrollo Water Pumps Are Used For Drainage And Sewage Treatment As A Water Sucking Pump, They Are Made Of Double Channel And Grinder Impellers With Double Mechanical Seals. These Heavy Duty Water Pump Construction Materials Include Cast Iron And Stainless Steel To Ensure We Have A Water Pump To Suit All Applications.Pedrollo Design And Manufacture All Their Own High Efficiency Motors In House.
Self-Priming Centrifugal Electric Water Pumps With Pre-Filter Suitable For Circulating And Filtering The Water Of Swimming Pools, Especially For Those Requiring Large Flow Rates (Skimming). Recommended For Residential Swimming Pools Also Can Be Used As A Fountain Motor
Pedrollo water pumps are now available for sales from Power Gas, a trusted pump shop Near you, Dubai, Sharjah, Abu Dhabi, Ajman, Ras Al Khaimah, RAK, Umm Al Quain, UAQ, Al Ain, Fujairah, UAE. The Pedrollo water pump range includes; surface, borehole, submersible water pumps variants throughout.
Suitable for use with clean water that does not contain abrasive particles and liquids that are not chemically aggressive towards the materials from which the water pump is made.
Thanks To Their Reliability, The Fact That They Are Easy To Use And Are Economical, They Are Ideal Small Electric Water Pumps For Home Use And In Particular For Distributing Water In Combination With Small Pressure water pump Sets And For The Irrigation Of Gardens And Allotments. The Pump Should Be Installed In An Enclosed Environment, Or At Least Sheltered From Inclement Weather.
Temperature of the liquid from -10 °C to +60 °C
Ambient temperature up to +40 °C (+50 °C for PK 60)
Manometric suction lift up to 8 m
Max. working pressure:
– 6 bar for PK 60, PK 60-MD, PK 65
– 7 bar for PK 80
– 10 bar for PK 90, PK 100, PK 200, PK
300
Continuous service S1
Suitable for use with clean water that does not contain abrasive particles and liquids that are not chemically aggressive towards the materials from which the pump is made.
Thanks To Their Reliability, The Fact That They Are Easy To Use And Are Economical, They Are Ideal For Domestic Use And Are Chilled Water Pump Suppliers In Particular For Distributing Water In Combination With Small Pressure Sets And For The Irrigation Of Gardens And Allotments. The Water Pump Should Be Installed In An Enclosed Environment, Or At Least Sheltered From Inclement Weather.
Temperature of the liquid from -10 °C to +90 °C
Ambient Temperature to +40 °C
Manometric suction lift up to 7 m
Max. working pressure
– 6 bar for CP 100-130-132-150-158 ST4
CP 100-130-132-150-158 ST6
– 8 bar for CP 170-170M ST4
CP 170-170M ST6
CP 180-190-200 ST4
CP 180-190-200 ST6
Continuous service S1
Suitable for use with clean water that does not contain abrasive particles and liquids that are not chemically aggressive towards the materials from which the water pump is made.
Thanks to their reliability, the fact that they are easy to use and are economical, they are ideal for domestic use and in particular for distributing water in combination with small pressure sets and for the irrigation of gardens and allotments. The water pump should be installed in an enclosed environment, or at least sheltered from inclement weather.
Temperature of the liquid from -10 °C to +90 °C
Ambient Temperature to +40 °C
Manometric suction lift up to 7 m
Max. working pressure:
– 6 bar for HF 5-50-51
– 10 bar for HF 5M-70
Continuous service S1
Suitable for pumping clean water and liquids which are not chemically aggressive towards the materials from which the pump is made. Because of their reliability and extremely silent operation, these pumps are recommended for domestic applications, in particular for pressuring and distributing water in combination with small or medium pressure tanks, for gardening and irrigating systems, etc. The pump should be installed in an enclosed environment or sheltered from inclement weather.
Temperature of the liquid from -10 °C to +60 °C
Ambient Temperature to +40 °C
Manometric suction lift up to 7 m
Max. working pressure 7 bar
Continuous service S1
Suitable For Water Supply, For Transferring Clean Liquids, And For Pressurizing Civic, Industrial And Agricultural Plants. The Stainless Steel Water Pump SYSTEM Multi-Stage Construction Ensures Very Low Operating Noise Thresholds. The Newly Designed Electric Motor, Made To Work With Inverters, Features Balanced And Quiet Operation. Efficiency Class Ie3, Insulation Class F And Protection Ipx4. The Ceramic – Graphite – Nbr Mechanical Seal Allows Reliable And Smooth Operation Over A Long Period Of Time.
Temperature of the liquid from -15 °C to +90 °C
Ambient Temperature to +40 °C
Manometric suction lift up to 7 m
Max. working pressure 16 bar
Continuous service S1
Suitable for use with clean water and liquids that are not chemically aggressive towards the materials from which the pump is made. The self-priming FUTURE JET pumps are designed to pump water even in cases where air is present. Because of their reliability and the fact that they are easy to use, they are recommended for use in domestic applications such as the distribution of water in combination with small or medium sized pressure tanks, and for the irrigation of gardens and orchards, etc. Installation needs to be undertaken in well ventilated closed areas or anyway protected from bad weather.
Temperature of the liquid from -10 °C to +40 °C
Ambient Temperature to +40 °C
Manometric suction lift up to 9 m (HS)
Max. working pressure 6 bar
Continuous service S1
The self-priming JCR pumps are designed to pump water even in cases where air is present. As a result of their reliability and the fact that they are easy to use, they are recommended for use in domestic applications such as the distribution of water in combination with small or medium sized pressure sets, and for the irrigation of gardens and allotments, etc. Suitable for use with clean water and liquids that are not chemically aggressive towards the materials from which the pump is made. The water pump should be installed in an enclosed environment, or at least sheltered from inclement weather.
Temperature of the liquid from -10 °C to +40 °C
Ambient Temperature to +40 °C
Manometric suction lift up to 9 m (HS)
Max. working pressure 6 bar
Continuous service S1
The self-priming PLURIJET pumps are recommended for pumping clean water even in cases where air is present and for liquids which are not chemically aggressive towards the materials from which the pump is made. Because of their silence, reliability and low energy consumption they are recommended for domestic and civil applications, in particular for pressurising and distributing water in combination with pressure tanks, for the recovery of rain water, for irrigation systems, etc. The water pump should be installed in an enclosed environment or sheltered from inclement weather.
Temperature of the liquid from -10 °C to +40 °C
Ambient Temperature to +40 °C
Manometric suction lift up to 9 m (HS)
Max. working pressure 10 bar
Continuous service S1
Useful for: water supply, cleaning sets, pressure boosting, firefighting sets, irrigation, industrial applications, water circulation in climatisation sets, agricultural applications.
Temperature of the liquid from -10 °C to +90 °C
Manometric suction lift up to 7 m
Max. pressure in pump body 10 bar (PN10)
Continuous service S1
These Stainless Steel Submersible Pump Useful For: Water Supply, Cleaning Sets, Pressure Boosting, Firefighting Sets, Irrigation, Industrial Applications, Water Circulation In Climatisation Sets, Agricultural Applications.
Temperature of the liquid from -10 °C to +90 °C
Ambient Temperature da -10 °C to +40 °C
Manometric suction lift up to 7 m
Max. pressure in pump body 10 bar (PN10)
Continuous service S1
3” submersible water pumps suitable for pumping clean water for many applications such as domestic supply, irrigation and water systems for small communities.
The hydraulic components, coupled to a high performance electric motor, make the 3SR pump extremely efficient in 3” category.
Economic savings on the use of water thanks to the high efficiency and the consequent reduced electricity consumption. With a diameter of only 3 inches, the costs of drilling a new well and the installation are greatly reduced. The construction with floating impellers allows the pumping of water with sand content of up to 150 g/m3.
Temperature of the liquid to +35 °C
Maximum sand content 150 g/m³
Maximum immersion depth of 60 m with a sufficiently long power cable
Installation:
– vertical
– horizontal up to 0.37 kW
Starts/hour: 20 at regular intervals
Minimum flow rate for motor cooling 8 cm/s
Continuous service S1
Suitable for use with clean water with a sand content of no more than 100 g/m3. Because of their high efficiency and reliability, they are suitable for use in civil, agricultural and industrial applications such as the distribution of water in combination with pressure tanks, for irrigation and for pressure boosting in fire-fighting sets, etc.
Temperature of the liquid to +35 °C
Maximum sand content 100 g/m³
100 m immersion limit
Installation:
– vertical
– horizontal, with the following limits: up to 12 stages or 11 kW
Starts/hour: 20 at regular intervals
Minimum flow rate for motor cooling 16 cm/s (0.5 m/s for 30 kW)
Continuous service S1
A new concept range of submersible multi-stage water pumps designed guarantee even greater reliability, thanks to patented innovative technical solutions which prevent blockage of the water pumps even after prolonged periods of inactivity. Because of their high efficiency and reliability they are suitable for use with clean water in domestic, civil and agricultural applications such as the distribution of water in combination with pressure tanks, for the irrigation of gardens and orchards and for pressure boosting, etc.
Temperature of the liquid to +40 °C
Pumps without float switch
Pumps fitted with power cables of other lengths
Other voltages or 60 Hz frequency
Support kit for horizontal operation
The TOP series is suitable for use with clear water as a water suction pump that does not contain abrasive particles.
. As a result of the design solutions that have been adopted, such as the complete cooling of the motor and the shaft with double seal, these small pumps are easy to use and reliable.
The heavy duty submersible pump are suitable for use in applications such as draining small flooded areas (rooms, cellars, garages) in the event of an emergency, for the disposal of waste water in the home (from dishwashers, washing machines) and for emptying drainage traps.
Temperature of the liquid to +40 °C
Immersion depth:
– 3 m for TOP 1-2-3
– 5 m for TOP 4-5
(with a sufficiently long power cable)
(Maximum liquid temperature +90 °C for a maximum of 3 minutes intermittent service)
Passage of suspended solids up to Ø 10 mm
Suction level:
– 14 mm above ground level for TOP 1-2-3
– 30 mm above ground level for TOP 4-5
Continuous service S1
The TOP series is suitable for use with clear water that does not contain abrasive particles.
As a result of the design solutions that have been adopted, such as the complete cooling of the motor and the shaft with double seal, these pumps are easy to use and reliable.
They are suitable for use in applications such as draining small flooded areas (rooms, cellars, garages) in the event of an emergency, for the disposal of waste water in the home (from dishwashers, washing machines) and for emptying drainage traps.
Temperature of the liquid to +40 °C
Immersion depth:
– 3 m for TOP 1-2-3
– 5 m for TOP 4-5
(with a sufficiently long power cable)
(Maximum liquid temperature +90 °C for a maximum of 3 minutes intermittent service)
Passage of suspended solids up to Ø 10 mm
Suction level:
– 14 mm above ground level for TOP 1-2-3
– 30 mm above ground level for TOP 4-5
Continuous service S1
The RX-VORTEX series pumps are suitable for use with dirty water. The design solutions that have been adopted, such as the complete cooling of the motor, guarantee the reliability of the pump. They are suitable for use in domestic applications such as for discharging dirty water containing suspended solid.
Temperature of the liquid to +40 °C
5 m maximum immersion depth (with a sufficiently long power cable)
Maximum liquid temperature +40 °C
Passage of solids:
– up to Ø 30 mm for ZXm 2/30
– up to Ø 40 mm for ZXm 2/40
Minimum immersion depth for continuous service:
– 265 mm for ZXm 2/30
– 275 mm for ZXm 2/40
The RX-VORTEX series pumps are suitable for use with dirty water. The design solutions that have been adopted, such as the complete cooling of the motor, guarantee the reliability of the pump. They are suitable for use in domestic applications such as for discharging dirty water containing suspended solid
Temperature of the liquid to +50 °C
10 m maximum immersion depth (with a sufficiently long power cable)
Solids passage:
– up to Ø 20 mm for RX 2/20, RX 3/20
– up to Ø 40 mm for RX 4/40, RX 5/40
Suction level:
– 25 mm above ground level for RX 2/20, RX 3/20
– 50 mm above ground level for RX 4/40, RX 5/40
Continuous service S1
The VX-ST submersible pumps in stainless steel are recommended for draining sewage water in domestic, civil and industrial applications, in every case where there are solid bodies in suspension, for example water mixed with mud, groundwater, surface water. They are suitable for draining flooded areas such as cellars, underground car parks, car washes, for emptying cesspools and for sewage disposal. These pumps distinguish themselves for their reliability, which can be best appreciated under automatic operating conditions in fixed installations.
Temperature of the liquid to +40 °C
5 m maximum immersion depth
Passage of solids:
– up to Ø 40 mm for VX /35-ST
– up to Ø 50 mm for VX /50-ST
Minimum immersion depth for continuous service:
– 290 mm for VX 8-ST and VX 10-ST
– 330 mm for VX 15-ST
– 360 mm for VX 20-ST
BC-MF submersible pumps are recommended for draining dirty and sewage water in domestic, civil and industrial applications. They come equipped with a DOUBLE-CHANNEL impeller and are capable of pumping liquids containing short fibred suspended solids up to Ø 50 mm. They are ideal for pumping sewage, waste water, surface water and water mixed with mud in locations such as blocks of flats and detached house. These pumps distinguish themselves for their reliability, which can be best appreciated under automatic operating conditions in fixed installations.
Temperature of the liquid to +40 °C
5 m maximum immersion depth
Passage of suspended solids up to Ø 50 mm
Minimum immersion depth for continuous service:
– 290 mm foe BC 10/50-MF
– 330 mm foe BC 15/50-MF
– 360 mm foe BC 20/50-MF
The RX-VORTEX series pumps are suitable for use with dirty water. The design solutions that have been adopted, such as the complete cooling of the motor, guarantee the reliability of the pump. They are suitable for use in domestic applications such as for discharging dirty water containing suspended solid
Temperature of the liquid to +40 °C
10 m maximum immersion depth (with a sufficiently long power cable)
Passage of solids:
– up to Ø 55 mm
Minimum immersion depth for continuous service:
– 550 mm
Continuous service S1
The TRITUS series of grinder pumps are fitted with a GRINDER in tempered stainless steel of great resistance which completely grinds up solid bodies and fibres in waste and refluent water from domestic, civil and industrial applications and conveys it under pressure into the sewers through small diameter pipes.
Temperature of the liquid to +40 °C
10 m maximum immersion depth (with a sufficiently long power cable)
Suction down above ground level:
– 85 mm for TR 0.75-0.9-1.1-1.3
– 95 mm for TR 1.5, TR 2.2, TR 2.2 AP, TR 3 AP, TR 3, TR 4
Minimum immersion depth for continuous service:
– 300 mm per TR 0.75-0.9-1.1-1.3
– 350 mm per TR 1.5, TR 2.2, TR 2.2 AP, TR 3 AP, TR 3, TR 4
Continuous service S1
The Pedrollo family have been manufacturing water pumps and motors in San Bonifacio since 1974 and are now globally recognised as a leading manufacturer in the water pumps industry. Over 90% of its production is exported to over 160 countries in five continents. Product development, design and production remain proudly ‘Made in Italy’.
Pedrollo Spa has focused on innovation, quality and the reliability of its products as the foundation for the business. With its own foundry, press shop for steel components, plastic moulding and motor winding divisions. Pedrollo industrial pump manufacturers can guarantee the greatest precision and the highest quality . The use of sophisticated robots and production lines at the forefront of technology enable the company to produce more than two million pumps a year.
The extensive ranges of Pedrollo water pumps cover most agricultural, domestic and industrial applications.Power Gas as a prestigious Pedrollo pumps supplier has been carrying the legacy of best among pump companies with the products as well as water pump repair service . We offer high Pressure electric water pumps for best price in Dubai.Pedrollo water pump is on the front line of the application and integration of electronics into pumping products and applications.
Pedrollo not only manufactures all its water pump motor, but they also design and manufacture all their own high efficiency motor pumps in house.The Pedrollo surface range includes; Peripheral, Centrifugal, Horizontal multi-stage, End Suction and Vertical multistage small water pumps, with self-priming variants throughout.
Pedrollo submersible water pumps are renowned for their reliability, robust construction, design and efficiency.The supreme industrial submersible pump, great for irrigation and drainage in addition the construction materials of pump include cast iron and stainless steel to ensure, we have a pump to suit all applications. They are Designed and Manufactured in Italy the range is exported worldwide through a network of experienced partners.
Pedrollo has a wide range of borehole water pumps & motors starting from 3” to 6” and the solar version is available in 4” size. Pedrollo borehole water pumps are market leaders due to its high sand handling capacity and durability. It can be a utility pump for various applications like irrigation pumps, water supply systems, pressure systems.